60W, 120W LED street lights
 
SERIES-D2 PRODUCT INTRODUCTION
60W, 120W LED street lights for energy efficient lighting
 
Outdoor lighting  
Overview
Utilize LG LED luminous source, which guarantees excellent lumen output up to 130Lm/W, great stability and fantastic light.
 
The ZGSM D2-Series LED street lights have a high luminous efficiency and better service life. Provide 5 years warranty on luminaire.
 
Color Options
Silver Gray  
 
 
 
 
LED LUMINOUS SOURCE   LED DRIVER   OPTIMAL HEAT RADIATION
   
         
  Lens code: 2M
Applications:
1. Two Driveway
2. Driveway Entrance
3. Urban Road
         
         
 
 
XTREME LUMINAIRE DESIGN    
 
 
 
 
     
Performance lens design, better proformance for
street lighting
  Whole luminaire utilize the stainless steel screws, no
corrosion worries
  Use German WAGO® connectors for output
wiring, safe, convenient & fast.
 
           
     
Standard ะค60mm installation aperture.   Utilize M16 waterproof connector for output cable
fixing, avoid damage of hard power pulling
  Neat inner cavity structure.  
 
     
Ultilize waterproof rubber gaskets to ensure the
lamp's narmal work under a moist environment.
Lamp power cable is put into the cavity, for valid
connections in advance.
  With a non-corrosive material, not only exquisite appearance, but also no corrosion concerns.    
 
 
SERIES-D2 APPLICATIONS
LED STREET LIGHTS
 
 
- for Outdoor Tennis Court, Spain   - for Squares, UAE
     
 
  - for Parking Lots, United Kingdom
   
 
- with Solar Power, Beijing China   - Industrial park, Henan China
 
SERIES-D2 PRODUCT INTRODUCTION
LED STREET LIGHTS
 
Dimming
Multiple dimming functions are integrated (0-5V DC or 0-10V DC or PWM Signal or Timer).
 
» 0-5V Dimming
The recommended implementation of the dimming control is provided below.
 
 
Notes:
1. The dimmer can also be replaced by an active 0-5V voltage source signal or passive components like resistors and zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-5V dimming is not used, Dim + should be open.
4. When 0-5V negative logic dimming mode and Dim+ is open, the driver will output maximum current.
 
» 0-10V Dimming
The recommended implementation of the dimming control is provided below.
 
 
Notes:
1. The dimmer can also be replaced by an active 0-10V voltage source signal or passive components like resistors and zener.
2. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
3. If 0-10V dimming is not used, Dim + should be open.
4. When 0-10V negative logic dimming mode and Dim+ is open, the driver will output maximum current.
 
» PWM Dimming
The recommended implementation of the dimming control is provided below.
 
 
Notes:
1. Do NOT connect Dim− to the output V− or V+, otherwise the driver will not work properly.
2. If PWM dimming is not used, Dim + should be open.
3. When PWM negative logic dimming mode and Dim+ is open, the driver will output maximum current.
 
» Time Dimming
 
Notes:
1. Time Dimming is required to program by computer (Microsoft Windows).
2. Set the timing curve by pulling the sliders.
 
Optical Control
Optical control function is supported by optional
 
 
If the fixture with OPTICAL CONTROL function, the Optical Receptacle will be installed on the cover of fixture. See A. Fit the pins of Optical Sensor to Optical Receptacle, firmly insert and rotate Optical Sensor to proper position.
 
  Optical Sensor
 
Time Control Dimming
Time control dimming function is supported by optional - Contact ZGSM for Details
 
AFTER-SALE SERVICE
Hangzhou ZGSM Technology Co., Ltd (“ZGSM”) warrants this ZGSM-branded hardware product against defects in materials and workmanship under normal use for a period of FIVE (5) YEAR from the date of purchase. ZGSM provides free repair or replacement within warranty period. ZGSM shall charge against defeats by abnormal storage, usage, connection or change the structure or any components of the product.
 
*Damage by thunder stroke over 10KV(L,N to FG) /6KV(L to N) will not covered by warranty based on EC61000-4-5.
 

 
SERIES-D2 PRODUCT SPECIFICATIONS
LED RECESSED LIGHTS
 
 
Product ZGSM-LD60D2 ZGSM-LD120D2 ZGSM-LD180D2 ZGSM-LD240D2
Nominal Wattage 60W 120W 180W 240W
Drive Current 630 mA 630 mA 630 mA 630 mA
Length of heat sink 170 mm 300 mm 430 mm 560 mm
Input Voltage 200-240V /277V AC
50/60Hz
200-240V /277V AC
50/60Hz
200-240V /277V AC
50/60Hz
200-240V /277V AC
50/60Hz
Dimming 0-5V, 0-10V, PWM, Timer 0-5V, 0-10V, PWM, Timer 0-5V, 0-10V, PWM, Timer 0-5V, 0-10V, PWM, Timer
Max. Current @ 208V 0.36 A 0.71 A 1.07 A 1.42 A
Max. Current @ 240V 0.31 A 0.62 A 0.93 A 1.23 A
Max. Current @ 277V 0.27 A 0.53 A 0.80 A 1.07 A
Operating Temperature -40 °C to +50 °C -40 °C to +50 °C -40 °C to +50 °C -40 °C to +50 °C
Power Factor (PF) > 0.95 > 0.95 > 0.95 > 0.95
Total Harmonic
Distortion (THD)
< 20% < 20% < 20% < 20%
Lumen Output (+/- 5%) 6300 lm 12600 lm 18900 lm 25200 lm
Optic 2M 2M 2M 2M
CRI Minimum 70 CRI Minimum 70 CRI Minimum 70 CRI Minimum 70 CRI
CCT
Rating IP66 IP66 IP66 IP66
Heat Radiator Anodized Aluminum Anodized Aluminum Anodized Aluminum Anodized Aluminum
Lens Tempered glass Tempered glass Tempered glass Tempered glass
Packaging Type 1 unit /ctn. 1 unit /ctn. 1 unit /ctn. 1 unit /ctn.
 
LUMEN MAINTENANCE   DC INPUT VOLTAGE (OPTIONAL)
 
Ambient
Temperature
TM-21 Lumen Maintenance
(60,000 Hours)
Theoretical L70
(Hours)
25 °C 96.56 % 485,000
40 °C 97.67 % 503,000
50 °C 95.72 % 347,000
 
Model Input Voltage Max. Current
ZGSM-LD60D2 12V/24V 3.09A @12V
 
DIMENSION DATA
 
 
Nominal
Wattage
60W 120W 180W 240W
"L" Length 494 mm
19.4”
624 mm
24.6”
577754 mm
29.7”
884 mm
34.8”
Weight 6.5 kg
14.3 lbs
8.5 kg
18.7 lbs
10.0 kg
22.0 lbs
11.8 kg
26.0 lbs
 
PACKAGING DATA
 
 
Nominal
Wattage
60W 120W 180W 240W
"L" Length 550 mm
21.7”
680 mm
26.8”
810 mm
31.9”
940 mm
37.0”
Weight 7.5 kg
16.5 lbs
9.5 kg
20.9 lbs
11.0 kg
24.3 lbs
12.8 kg
28.2 lbs
 
CERTIFICATION
 
LM80 Compliant CE / ROHS
IP66 Rated IOS9001, ISO14001