200mm LED Crossing Light in Colombia

This traffic signal light project in Colombia finished in 2016. The project is located in the downtown area of Barranquilla, where there is a lot of traffic and people. An intersection of the project adopts 8 pieces 200mm steady red man dynamic green pedestrian lights and 8 pieces 200mm red, yellow and green high-power full ball traffic lights. In addition, Acoustic signals and push buttons are also equipped, making the project very user-friendly. The client is very satisfied with the solution, which not only facilitates people's travel, but also modernizes the city.

Project details:

ProductModelDiameterQuantity
Full ball traffic lightsJD200-3-ZGSM-3-RYG200mm64pcs
Pedestrian lights (Steady red and green)RX200-3-ZGSM-2-RG200mm64pcs
Customer Feedback
nice supplier, willing to resolver issues.fast and professional factory, very nice lamps. TUV tested approved Looking for more business in future!
Antonella
CEO of Company

.

Download

datasheet
installation Manual

Products Used

Video

Video from Youtube, Practical Engineering

Related Products

Related Projects

Related Blogs

People also ask

A flashing green light on traffic lights LEDs means that the signal has been activated by a pedestrian or that the green-to-red transition is about to begin. So, be careful when you approach a flashing green light, as the signal could be activated or turned by a pedestrian at any time and you may have to stop and let the pedestrian cross the street.

Red arrow - A red arrow means stop until a green signal or a green arrow appears. Do not turn towards the red arrow.

Yellow - A yellow signal light warns you of an imminent red signal. When you see a yellow light, you should stop if you can do it so safely.

Green light - A green light means "go", but you must let any vehicles, bicycles or pedestrians stop at the intersection before you can proceed.

Make sure to stop before the zebra crossing when you see a yellow traffic light. Because the yellow light immediately turns red, and the corresponding signal light in the other direction will turn red. If you drive into the intersection, you may collide with the vehicle in the other direction, which is very dangerous. Of course, if the driver has entered the intersection, as long as the yellow light is displayed, it is safe to pass.

  1. Good visibility: LED traffic lights can still maintain good visibility and performance indicators under harsh weather conditions such as continuous light, rain, and dust.
  2. Power saving: almost 100% of the excitation energy of LED traffic lights becomes visible light, compared with 80% of incandescent bulbs as heat loss, and only 20% as visible light.
  3. Low heat energy: The cooling surface of the LED traffic light can avoid burns by maintenance personnel, and can obtain longer life.
  4. Long lifespan: LED traffic lights including arrow traffic lights have no filament vibrations that cause damage.
  5. Impact resistance: LED traffic lights have no glass cover cracking problem.
  6. No false display phenomenon: LED traffic lights are completely free from the phenomenon that the old halogen lamps are affected by sunlight reflection.