Pedestrian Traffic Light | 200mm & 300mm Crossing Signals

Q: What is the meaning of pedestrian traffic light?

At junctions with LED traffic lights , pedestrian signals assist walkers in crossing. The pedestrian crossing signal is a white walking symbol. A flashing or constant orange hand signal prohibits pedestrian crossing. A person facing a walk signal may cross the street in the signal's direction.

Q: What does flashing amber mean?

A flashing amber light indicates that it is okay to proceed. At a pelican crossing, amber flashing lights indicate that you may proceed if there are no people crossing or about to cross the road. Even when the lights are flashing amber, pedestrians still have precedence.

200mm/300mm Pedestrian Traffic Light

Pedestrian Traffic Light, also named pedestrian signals, pedestrian signal heads, zebra crossing lights, or crossing work lights, are used to inform pedestrians when to cross a road. Most pedestrian signal heads will have two lights: a 'walk' light (normally a walking human figure or countdown, typically colored green or white) and a 'don't walk' light (normally either a red man figure or a hand). The size is generally 200 mm and 300 mm.

Product Features

Working humidity: ≤95%
Utilizing imported LED chips, long lifespan
Using constant current driver
Low power consumption
Multi-ply sealed water-resistant, IP rating:>IP54
Visible distance: >500M
Long visible distance, symmetrical light distribution.
Novel structure and beautiful appearance, using inflaming retarding and UV-proof housing material.

ZGSM products are designed for the global market. Please contact our sales team for certification details.
Products information is for reference only. Some options may not be available for each configuration. Please contact us for further details.

Series No	Pedestrian Traffic Light
Products	Pedestrian signals,pedestrian signal heads, zebra crossing light or crossing work light
Apply Diameter	Ф200 mm, Ф300 mm
Wavelength	Red: 625±5nm; Green: 500±5nm; Yellow: 590±5nm
Light Intensity	5000~13000mcd
Input Voltage	100-240/277 VAC, 50 / 60 Hz
Power Factor	>0.90
Visual Angle	<30°
IP Rating	IP54
Standard(s)	GB14887-2006, EN50293:2000 & EN12368:2006
Visible Range	200m (656ft)
CRI	/
Operating Temperature	-40°C to + 75°C
Warranty	1 Year
Certification	CE, ROHS
Control	Smart control, remote control

Specification_TrafficLight

Installation Manual_TrafficLights

Video from Youtube, Practical Engineering

Street Traffic Light and Crosswalk Light in Ecuador

300mm Traffic Lighting System in Peru

Traffic Signs Light for Motorways in Pakistan

200mm Traffic Lights in Spain

Crossing light and road traffic light in Dominica

200mm LED Crossing Light in Colombia

At junctions with LED traffic lights, pedestrian signals assist walkers in crossing. The pedestrian crossing signal is a white walking symbol. A flashing or constant orange hand signal prohibits pedestrian crossing. A person facing a walk signal may cross the street in the signal's direction.

A flashing amber light indicates that it is okay to proceed. At a pelican crossing, amber flashing lights indicate that you may proceed if there are no people crossing or about to cross the road. Even when the lights are flashing amber, pedestrians still have precedence.

Traffic signals may not reduce all types of crashes at an intersection, but that is the ultimate goal. Traffic signals may result in a decrease in the more serious, right-angle type of crashes, but sometimes there may be an increase in rear-end crashes which are typically less severe. Rear-end crashes are typically caused by drivers following too closely and not paying attention.

No. In some cases where speeding is a problem, citizens may believe a traffic signal is necessary to slow traffic down. However, a traffic signal may sometimes result in greater speeds because drivers accelerate to try to "beat the light" before it goes red. Two or more adjacent traffic signals are usually timed to display green indications and progress traffic at the speed limit on the higher volume roadway (street). In these types of signal systems, not only is it unsafe, but it is counterproductive to exceed the speed limit.

A pedestrian signal allows a safer opportunity for pedestrians to cross the street at signalized intersections. When activated, the pedestrian signal provides time for the pedestrian to enter the street on a steady "Walk" or symbolic walking person and to finish crossing the street on a flashing "Don't Walk" or upraised hand indication. Where there are push buttons, you must press the push button to get the "Walk" signal. You may not immediately get a "Walk" indication. However, the traffic signal knows there is a demand for the "Walk" indication and is working a pre-programmed sequence to safely transition to the "Walk" indication.

Related Products

200mm (8’’) LED Traffic Light

300mm (12’’) Traffic Arrow Lights

300mm (12’’) Traffic Signals Lights

200mm (8’’) Arrow Traffic Light

Lane Control Lights

Traffic Light Countdown Timer

Related Blogs

IP rating-important factor of LED lights

Something you should know about LEDs

How Long do Led Lights Last ?

How to choose the right LED driver for your LED light?

Best LED Traffic Lights Manufacturer & Factory & Supplier in China

ZGSM as the best commercial, industrial outdoor arrow traffic lights manufacturer, factory, supplier, and exporter in China since 2005, The factory is ISO9001, ISO14001, ISO45001, and ISO50001 certified. We have rich experience in manufacturing traffic signal lights with the following advantages and services:

OEM/ODM /SKD Order acceptable.
Rich experience in successful traffic signal projects.
Various sizes and types of signal lights are optional.
Lots of stable material suppliers, high quality and cost well.
Can be combined with solar energy systems.

aging test of traffic lights — Aging test of traffic lights

Why Choose us as your Traffic Signs Light Supplier in China？

OEM/ODM/SKD

Available to do OEM/ODM/SKD for all stop lights. No MOQ limits for signal lights retailers, wholesalers, and engineering companies.

FAST DELIVERY TIME

As a reliable led traffic light supplier, we have stocks of raw materials for traffic signs light, regular delivery time is 3 days for samples and 2 weeks for bulk.

BEST QUALITY&PRICE

We use top stable quality led driver and chips for all traffic lighting systems red, green, and yellow lights. Providing 1 Year warranty at the cheapest price.

CERTIFICATES

Our stop lights and pelican crossing lights are CE and RoHS approved, and our factory ISO9001, ISO14001, ISO45001, and ISO50001 certified.

R & D Team

Product Testing

test room of led lighting

In order to ensure the high quality of each product, we will conduct more than 30 different aspects of testing in our own laboratory before the product goes on the market. After all the tests are passed, the product can be approved for marketing. In mass production, for some basic safety and performance tests, we will conduct 100% testing to ensure that every product delivered to the customer is perfect.