Using light shield to reduce backlight in outdoor lighting
Using light shield to reduce backlight in outdoor lighting
Introduction
In outdoor lighting applications, ensuring that light precisely reaches the target area while minimizing interference from wasted light has always been a key challenge in lighting design. Although traditional polarized light distribution schemes can achieve long-distance illumination and directional lighting, they tend to generate backlight and stray light during light propagation. In some cases, this light serves no purpose; not only does it reduce lighting efficiency (not to be confused with luminous efficacy, what’s luminous efficacy?), but it may also cause light pollution and adversely affect the surrounding environment. As urban nighttime lighting evolves toward greater precision, low-carbon practices, and eco-friendliness, addressing backlight emission has shifted from an “optional consideration” to a “mandatory requirement.” This article begins with a definition of backlight emission, analyzes its negative impacts, and outlines practical strategies for reducing backlight in road lighting projects. It also highlights the advantages of physical matrice (one of light shields) in this application; through precise optical control design, they concentrate light more effectively, resulting in higher-quality outdoor lighting. Let’s dive into the main text to learn more.
What is backlight?
In outdoor lighting, “backlight” refers to light that, during operation, deviates from the intended target area and propagates toward the rear of the luminaire—that is, into areas not designated for illumination. Backlight uplight glare often occur together, a concept commonly addressed in outdoor lighting via the “BUG rating” system. The manifestation of backlight varies significantly depending on the application: in roadway lighting, it typically appears as a reverse halo on the road surface or sidewalk behind the light pole; in floodlighting, it manifests as “spill light” cast onto building facades or areas located behind the intended target. From an optical perspective—when analyzed alongside light distribution curves—backlight corresponds to the luminous intensity distribution within the 180° to 360° azimuthal range of the luminaire. In isolux diagrams (What’s isolux diagram?), this represents light directed away from the roadway toward the side where buildings or properties are located. It is important to note that backlight is not necessarily “useless” light; its value depends on the specific application and is closely linked to relevant lighting performance metrics. For instance, in standard urban street lighting, a moderate amount of backlight can provide essential illumination for sidewalks, offering practical utility. Conversely, on expressways or highways—where there are no sidewalks—backlight serves no functional purpose for traffic illumination; it is considered entirely extraneous spill light that requires strict control, which can be effectively managed through the use of light shields.
Why go with less backlight?
First, the primary motivation for reducing backlight emission is to improve light utilization. Taking an expressway as an example, when a luminaire’s overhang is 0 meters, every beam of light directed backward means that light is not projected onto the road surface, which directly reduces the luminaire’s utilization efficiency. In the coefficient of utilization (CU) curve for streetlights, we can see that the less backlight there is, the more light is directed toward the roadside, and the higher the CU value. If you need to achieve the same target illuminance on a road, streetlights (ZGSM streetlights) with less backlight typically require lower power consumption.
Second, backlight is one of the primary sources of light pollution and light-related disturbances. Take rural side roads as an example: there are often many houses on both sides of the road. With more backlight, more of the light emitted by streetlights will shine into residents’ windows, leading to complaints. Similarly, light directed toward green belts is also caused by backlight and constitutes unnecessary illumination. Corresponding to backlight is light directed toward the sky (uplight), which exacerbates skyglow and disrupts astronomical observations and nocturnal ecological rhythms.
Streetlights with less backlight indicate higher light utilization efficiency. Therefore, if your road project aims to achieve the same target luminance (brightness), a solution with less backlight typically requires lower power consumption. From a carbon emissions perspective, controlling backlight means reducing ineffective light emission at the source, which aligns with the mandatory requirements for lighting energy conservation under the “Dual Carbon” goals.
In summary, in applications such as road lighting, landscape lighting, and architectural floodlighting, backlight not only cannot be effectively utilized but also results in low light utilization efficiency, leading to energy waste; in some scenarios, it can also cause light pollution (More about light pollution from road lighting), thereby affecting the overall lighting effect of roads, buildings, and landscapes. Conversely, suppressing backlight and precisely controlling light energy within the effective illumination area has become a key requirement for high-quality outdoor lighting.
How to reduce the backlight by using light shield?
Optimized lens to reduce backlight
Among the various methods for reducing backward light emission, the use of lenses stands out as the most fundamental and proactive “source-control” solution. The core principle involves employing an asymmetric freeform surface design to redistribute light emitted from an LED or other light source. This ensures that the maximum possible amount of light is directed toward the target area (e.g., the C0–180° angular range), while minimizing the proportion of light directed backward (the C180–360° range). For further technical details, it is advisable to consult with a professional lens manufacturer. From an end-user perspective, we recommend evaluating the backlight ratio and determining whether a specific luminaire’s light distribution is suitable for your project—by reviewing IES files, photometric test reports, or relevant third-party documentation. Taking Ledil lenses as an example, one can assess the backlight ratio using an LCS (Luminaire Classification System) table and its corresponding graph. In a standard light distribution (What’s light distribution?), the backlight ratio is approximately 35%, whereas in a “low-backlight” configuration, this figure is reduced to just 21%. Additionally, the backward light component for various light distributions can be analyzed using a coefficient of utilization curve and an isolux plot.
Light shield – Physical baffles to reduce backlight
A physical baffle—a type of “light shield”—is the most intuitive and easily implemented passive light-control solution. It is particularly well-suited for retrofitting existing luminaires or addressing temporary light-control requirements. Typically, this involves attaching metal vanes or curved shrouds to the rear, sides, or front of the luminaire housing to block stray light falling outside the primary beam. In roadway lighting, for instance, a baffle can be mounted on the rear of a street light to intercept backward-directed light, thereby minimizing the impact on residential areas located behind the luminaire (as shown in below image left). However, there is a trade-off: smaller baffles offer limited light-blocking effectiveness, while larger ones can compromise the luminaire’s aesthetic appeal. Physical baffles are also widely used in industrial high-bay lights and floodlights; for example, the curved shrouds often found on “UFO-style” high-bay fixtures serve to partially conceal the light source, which helps reduce glare. Similarly, sports field lights and floodlights (More ZGSM floodlights) frequently incorporate such baffles—commonly referred to as “flood light shields” (see the below image right). When high-power luminaires of this type are installed at steep angles, the intensity of light directed toward the “front-light” and “front-very-high” (FLH/FLVH) zones increases significantly; this is a primary source of “light trespass,” which often leads to complaints from nearby residents. In extreme cases, sports field lights lacking such baffles may even produce “uplight,” contributing to skyglow. Whether it’s a street light shield or a flood light shield, these types of physical baffles offer the advantages of a simple structure and low cost, without requiring any modifications to the core optical components of the lighting fixtures. However, they also have clear limitations: they can detract from the fixture’s aesthetic appeal, and, if poorly designed, may result in incomplete lighting coverage.
Light shield – Physical matrices to reduce backlight
A physical matrix is a precision light-control component—a type of “light shield” between an optical lens and a large-scale physical baffle. Designed specifically for outdoor asymmetric lighting applications, it employs a specialized structure to precisely constrain light, ensuring the beam is concentrated within the intended target area. When used in conjunction with an asymmetric lens (What’s asymmetric light distribution?), it effectively suppresses stray light directed toward unwanted areas, ensuring that illumination is confined strictly to the target zone. This enhances light utilization efficiency while improving the visual experience of the nighttime environment. Its operating principle is similar to that of a standard physical baffle; however, while a physical baffle is typically mounted on the luminaire housing, a matrix-style light shield is integrated directly onto the lens. Once installed, light emitted from the LED source—having already been refracted or reflected by the lens—undergoes secondary refraction or absorption upon striking the matrix-style light shield. These matrix-style light shields are available in black or white versions. The black variant is highly effective at suppressing back-directed light, though its high absorption rate significantly reduces the luminaire’s overall light output efficiency. The white variant also suppresses back-directed light; however, while some of this light is absorbed, a substantial portion is refracted and redirected toward the target area (such as the roadway). Another key advantage of the matrix light shield is its ease of installation and removal. If backlight suppression is not required for a specific application, the luminaire can be assembled using a standard configuration; conversely, if the need arises later, this kind of light shield can be easily added. Furthermore, it offers a superior aesthetic profile compared to traditional physical baffles.
Reduce backlight light by light shield in projects
Increase luminance with less power consumption
Average road surface luminance (Lm) is a key indicator of visual quality for drivers, determined by the combined effects of road surface illuminance and the road surface’s reflective properties. The “reduced backlighting” technology minimizes light spill in non-target directions, directing more luminous flux toward the road surface and thereby increasing average road surface luminance. As shown in the figure below, we compare two light distribution patterns: one using the low-backlight solution with a light shield, and the other using a conventional solution. In the Dialux lighting simulation (ZGSM Dialux lighting simulation), we can see that the Lm of the former is 1.62 cd/m², while that of the latter is only 1.41 cd/m²—a reduction of nearly 13%. So, for a streetlight with the same 15,000 lm output, where does the remaining light go? If we include the sidewalk in the analysis, we can see that the illuminance on the sidewalk in the former configuration is only 11.58 lux, while in the latter it is close to 20 lux—light levels that fully meet the requirements of Lighting Class P1. For expressways without sidewalks, this is clearly a waste of light, as the latter configuration would require higher wattage to meet Lighting Class M2, while also directing more light toward non-target areas.
Ensure Rei when adopting the low backlight solution
Of course, the low-backlighting approach is not a one-size-fits-all solution. As mentioned earlier, light that should originally have been directed toward the roadway is instead directed toward the sidewalk; therefore, if a project involves sidewalks, the adverse effects of insufficient backlighting must also be considered—especially on roads with dense tree cover that require longer cantilevers. In the figure below, the street profile consists of a 7-meter-wide road (two-way), two lanes in each direction, a 1-meter median, and 2-meter-wide sidewalks on both sides. The luminaire arrangement features a 9-meter-high pole, a 1-meter cantilever, and a 36-meter pole spacing. After inserting both the low-backlight and standard light distribution models, we analyzed their lighting performance; the results show that the sidewalk illuminance in the latter is significantly higher than in the former. More importantly, the former fails to meet a key requirement: the Rei value. The Rei value (SR vs Rei) for the former is 0.34, while that for the latter is 0.72. This is primarily because the reduction in backlighting leads to poorer lighting continuity in the adjacent peripheral areas of the roadway. The smaller this value, the greater the variation in illuminance on the motor vehicle lanes relative to the illuminance on the virtual lanes on both sides of the road; conversely, the higher this value, the smaller the difference in illuminance between the virtual lanes and the actual lanes, allowing drivers to better observe objects and obstacles in the surrounding area, such as pedestrians or potential hazards. In the aforementioned scenarios, the use of light shields to reduce backlighting must be strictly controlled; if used too sparingly, it can result in insufficient illuminance on the non-motorized lanes and cause the Rei value to fail to meet requirements.
ZGSM lighting solutions
Summary
Backlighting in outdoor lighting is one of the primary factors contributing to light pollution, energy waste, and complaints from residents. Using light shields to reduce backlighting not only helps improve average road surface brightness and lighting uniformity (Lighting uniformity and how to improve it?) but also effectively minimizes negative impacts on surrounding residential areas and ecologically sensitive areas. There are three main technical approaches to minimizing backlight: optical lens design, which focuses light on the target area through precise light distribution; and two methods involving light shields. Physical baffles—which use metal baffles or curved housings to directly block stray light—are suitable for retrofitting existing fixtures, while matrix-style light shields achieve more precise beam control through an array of shading units. In actual projects, low-backlight solutions often illuminate vehicular lanes with lower wattage. However, in certain projects, we must still conduct a comprehensive assessment based on road conditions (such as the presence of sidewalks or tree shading), as failure to do so may result in a decrease in the Rei value—that is, reduced lighting continuity in surrounding areas—thereby impairing drivers’ ability to identify roadside obstacles. ZGSM’s lighting solutions offer customized combinations of lenses, baffles, and matrix-style light shield tailored to different application scenarios. While meeting M/P-class lighting standards, these solutions also prioritize energy efficiency, aesthetic appeal, and lighting comfort. Please contact us for more information.
Related Products
Related Blogs
Related Cases
People also ask
Author introduction
Hello Customers,
My name is Taylor Gong, I’m the product manager of ZGSM Tech. I have been in the LED lights industry for more than 13 years. Good at lighting design, street light system configuration, and bidding technology support. Feel free to contact us. I’m happy to provide you with the best service and products.
Email: [email protected] | WhatsApp: +8615068758483